3 in 1 Aneng multimeter, oscilloscope and signal generator
This excellent 3 in 1 multimeter is the perfect solution if you are working in the field, if you are a hobbyist or if you are doing professional designing work and you do not want to spend a load of money on a large bench oscilloscope. It has the full functionality of a digital multimeter when it is put in multimeter mode and you can simply change the measuring mode with the simple press of a button.
You can also switch to oscilloscope mode which which enables you to measure different waves that are generated and you can select the different parameters that the oscilloscope should measure automatically for you.
There are 2 different wave generators of which one can be used to generate a wave of your choice while measuring the output somewhere else in the circuit to see if the output is correct. The other method to use the wave generator is via an app that comes pre-installed on the device where you can change your frequency, duty cycle, amplitude and your wave for to whatever you would want it to be.
Please note that the battery is not included.
Technical specifications:
Oscilloscope and wave generator:
| Band width | 50MHz |
Input | Dual channel |
Sampling rate | 200/280MSa/s |
Input coupling | AC/DC |
Input voltage | x1 range: < 50V x2 range: < 100V |
Sweep range | 10ns/div-20s/div |
Time range | 20ppm |
Record length | Up to 128Kbyte |
Vertical sensitivity | 20mV/div-10V/div |
Offset range | 4 grids (positive and negative) |
Analog bandwidth | 50MHz |
Low frequency | More than 10Hz |
Auto measurments | Period / Frequency / Peak / Maximum / Minimum / RMS / Duty Cycle / Number of Pulses |
Signal generator | Sine wave / square wave / sawtooth wave / half wave / full wave |
Multimeter:
AC voltage | 0-750V |
DC voltage | 0-1000V |
AC/DC current | 0-10A |
Resistance | 0Ω-250.0MΩ |
Capacitance | 0nF-99.99mF |
Diode/buzzer | Yes |
Data retention | Yes |
Battery state indicator | Yes |
USB charge | Yes |
True RMS | Yes |
Battery | 18650 Li-One |
Screen display | VA reverse colour screen |
Screen brightness | 30%, 50%, 80%, 100% |
Range | Auto/Manual |
Auto off | Automatic shutdown can be set 1 minute/10 minutes/30 minutes/60 minutes/120 minutes/shutdown (unlimited time) |
What is in the box:
