Steady Hand Game School Project

ITEM	DESCRIPTION
Buzzer	Buzzer that can operate on a 3V battery
Wonky wire	Bare uninsulated stiff wire, Steel, or copper will do.
Metal ring	Bare metal ring, like a soda can ring or a washer
Handle or wand	Old pen as the handle or wooden dowel, and a short piece of solid wire for the loop
Tape	Insulation tape/ Electrical tape is best, but any tape should work
Base	A wooden board works best, you can also use a cardboard box. We've found that the crooked wire is more fragile because of the cardboard box.
Led's	2x 3V led's
Switch	a Normale latching SPST switch to switch the game on/off
Wiring	+- 0.2mm insulated conductors. 2-3M Red and Black
Motor	3-6V Motor will work well. A propeller is needed for the effect. ( For a fun finish effect, the motor is only an extra.).
Battery holder	Battery holder for 2xAA or 2xAAA will give you 3V
Resistor	Resistors will not be needed if your LED's are 3V like your supplied voltage
Batteries	2xAA or 3xAAA Batteries will be required

Add a comment